Savvy Offroad Aluminum Rocker Trim Kit | 2007–2018 Jeep Wrangler JKU (4-Door) The Savvy Offroad Aluminum Rocker Trim Kit is precision-engineered from 1/8" 6061 CNC-machined aluminum specifically for the 2007–2018 Jeep Wrangler JKU 4-door protecting your JKU's rocker panels from rocks, debris, and trail hazards at a fraction of the weight of steel alternatives. What separates this kit from every other JKU rocker trim on the market is the dual installation system: tape-on using automotive-grade 3M adhesive for a clean, non-invasive install, or bolt-on using laser-etched drill hole locations etched directly onto the trim panel for precise, effortless placement. One kit. Two methods. Your choice. Made in the USA. The JKU has been in service since 2007 which means the oldest models are now nearly 20 years old. Many of these rigs have accumulated years of trail use, rock rash, and rocker panel wear that starts with paint chips and progresses to bare metal exposure and surface rust. The Savvy aluminum rocker trim kit stops that cycle with a rust-proof 6061 aluminum panel that protects the rocker surface for the long term whether your JKU is a daily driver, a trail rig, or a build that does both. Two Installation Methods, One Kit Most JKU rocker trim kits force a choice at purchase and provide no precision guidance for the bolt-on method. The Savvy kit includes both options and solves the installation accuracy problem that causes most aftermarket trim fitment errors. BOLT ON HARDWARE NOT INCLUDED Tape-On Installation : Automotive-grade 3M adhesive tape provides a clean, non-invasive install with no drilling, no holes in the JKU body, and no permanent modification. The preferred method for daily-driven JKUs where a clean, stock-appearing look matters. Quick to install, strong in shear resistance when applied to a properly prepared surface, and fully reversible.

Bolt-On Installation :
For maximum mechanical strength on JKU builds that see serious trail use. Drill hole locations are laser-etched directly into the aluminum trim panel no measuring, no center punch, no marking required. Drill exactly where the panel tells you and the bolt pattern is perfect every time. This precision manufacturing detail eliminates the most common installation error in aftermarket trim fitment and does not exist on any competing JKU rocker trim product. BOLT ON HARDWARE NOT INCLUDED Key Features Purpose-Built for the Jeep Wrangler JKU : Engineered using updated Jeep JKU CAD data for the 4-door JKU's specific rocker panel dimensions and profile. Each trim piece is machined to follow the exact contour of the JKU rocker panel for a seamless, flush fit that maintains the JKU's body lines rather than sitting proud of the surface. Dual Installation Method, Tape-On or Bolt-On : Automotive-grade 3M tape or bolt-on with laser-etched drill locations. Both options included in one kit. Choose based on your use case, your build, and how much time you have.

Laser-Etched Drill Hole Locations :
For bolt-on installation, exact drill hole positions are laser-etched directly into the aluminum trim surface. No measuring, no marking, no guesswork drill exactly where the panel shows you. This precision detail does not exist on competing JKU rocker trim products and is the difference between a straight bolt pattern and a frustrating install. 1/8" 6061 CNC-Machined Aluminum : The same structural alloy used in Savvy's Legacy bumper line. At 1/8" thickness, rigid enough to deflect rocks and debris from the JKU rocker surface, light enough to add negligible weight. Stronger per pound than steel and naturally corrosion-resistant without any coating required. Rust & Corrosion Resistant, Critical on Older JKU Builds : The JKU has been on the road since
2007. On a platform this age, bare metal rocker panel exposure from paint chips and trail rock rash progresses to surface rust quickly. 6061 aluminum does not rust. This kit protects the rocker surface with a material that will outlast the panel it is mounted on.

Fits 4-Door JKU :
Designed for the Jeep Wrangler JKU 4-door rocker panel configuration. See separate listings for 2-door JK rocker trim options.

Ships Raw Aluminum :
Powder coat or paint to match your build. Raw 6061 aluminum can be left unfinished it will not rust in raw condition.

Made in the USA :
CNC-Cut & Bent and precision-engineered in America for exact JKU fitment.

Specifications Fitment:
2007–2018 Jeep Wrangler JKU (4-door) Material: 1/8" 6061 CNC-machined aluminum rust-proof and corrosion-resistant Installation: Tape-on (automotive-grade 3M adhesive) or bolt-on (laser-etched drill locations) both options included.

BOLT ON HARDWARE NOT INCLUDED Finish:
Ships raw aluminum, ready for powder coat, paint, or leave raw Manufacturing: CNC-machined in the USA using updated Jeep JKU CAD data Why Rocker Protection Matters More on a JKU Build The Jeep Wrangler JKU ran from 2007 to
2018. The oldest builds are now approaching 20 years of service and most of them have accumulated years of trail rock rash, parking lot door dings, debris impacts, and the slow progression of paint damage that leads to bare metal exposure. On a newer JL or JT, rocker trim is preventive. On a JKU that has been on the road for 10, 15, or nearly 20 years, rocker trim is often corrective stopping a paint damage cycle that has already started before it progresses to surface rust and metal degradation. Aluminum trim that covers the damaged area stops moisture and oxygen from reaching the bare metal underneath, and the 6061 alloy itself will never rust regardless of what conditions it is exposed to. This is the argument for rocker trim on the JKU that no competitor makes, and it is the reason it matters differently here than on a brand-new JL or Gladiator. Rocker Trim vs. Rock Sliders on the JKU They protect against different types of damage and both belong on a JKU that gets wheeled seriously. Rock sliders are structural mounted armor for direct obstacle contact rocks, ledges, and anything the rocker panel would otherwise hit on technical terrain. If your JKU makes hard contact with obstacles, sliders absorb that impact before it reaches the body. Rocker trim protects the panel surface from chips, abrasion, rock debris, and the low-level wear that accumulates between trail runs and during daily driving. It is the protection that works when the sliders are not between the rock and the body. On a JKU that has been wheeled for years, both together give you the most complete rocker protection available. See the Savvy Krawler Lite Rock Sliders for the JKU for the structural side of that pairing. Best For 2007–2018 Jeep JKU owners who want lightweight aluminum rocker panel protection without steel weight or rust concerns Older JKU builds where paint damage and rock rash have already started and need to be stopped before they progress to bare metal rust Daily-driven JKUs where tape-on installation keeps the look clean and non-invasive Trail rigs where bolt-on installation provides maximum strength for serious use Builds pairing rocker trim with Krawler Lite rock sliders for complete JKU rocker protection JKU owners who want corrosion-resistant aluminum protection that outlasts the platform it is mounted on Why Choose the Savvy JKU Rocker Armor Trim Kit? Many Jeep JKU rocker guards add weight, bulk, or a more industrial look than some Jeep owners want. The Savvy rocker armor trim kit is designed for drivers who want real rocker protection with a cleaner, lighter, more refined appearance . For Jeep owners searching for Jeep JKU rocker armor , Jeep Wrangler JKU rocker trim , or a lightweight aluminum rocker protection kit , this setup offers a strong combination of 6061 aluminum durability, rust resistance, high-clearance styling, and flexible installation options . It is an ideal upgrade for off-roaders, trail riders, and Jeep owners who want functional protection that still looks clean on the street. Frequently Asked Questions Does this fit the 2-door JK as well as the 4-door JKU? This kit is designed for the Jeep Wrangler JKU 4-door rocker panel configuration. What year range does this fit? The kit is designed for the 2007–2017 Jeep Wrangler JKU 4-door. Which installation method is stronger? Bolt-on using the laser-etched drill locations provides maximum mechanical strength for serious trail use. Tape-on using automotive-grade 3M adhesive is appropriate for daily driving and moderate trail use. Both methods are included in one kit choose based on how you use your JKU. BOLT ON HARDWARE NOT INCLUDED What are the laser-etched drill holes? For bolt-on installation, exact drill hole locations are laser-etched directly into the aluminum trim surface. Drill exactly where the panel shows you no measuring, no marking, no misaligned holes. This precision detail eliminates the installation guesswork that causes crooked bolt patterns on generic rocker trim products. Does it rust? No. 6061 aluminum does not rust in any condition. Raw aluminum can be left unfinished, 6061 forms a natural oxide layer that protects against moisture and oxidation indefinitely. Powder coat or paint if you want a color match. Do I need rock sliders if I have this rocker trim? Rocker trim and rock sliders protect against different types of damage. Trim protects the panel surface from chips and abrasion. Sliders handle structural impacts from obstacles. For a JKU that gets wheeled seriously, both together cover what neither one covers alone. See the Savvy Krawler Lite Rock Sliders for the JKU for the structural option. What finish does it ship in? Raw aluminum. Powder coat or paint to your preferred color, or leave natural 6061 aluminum holds up in raw finish without rusting.